Product Overview

61
800.292.2737 | [e-mail] | aymcdonald.com 800.292.2737 | [e-mail] | aymcdonald.com
Cast Iron Meter Bars
Cast Iron Meter Bars
4-19 4-19
NOTE:
For side taps, add letters. See page 40 & 60.
For other options, see page 60.
All dimensions shown are for reference only. Contact factory if
specic dimensional values or tolerances are required.
INTEGRAL MNPT INLET & OUTLET, CAST INTEGRAL SWIVELS
Cast Iron Meter Bars with Cast Integral Swivels - 6569 Series
These bars are designed for use with natural, manufactured and L.P. gas only.
MNPT x MNPT
DIMENSIONS
MNPT x FNPT Union
DIMENSIONS
Centerline
A
MNPT Inlet
B
FNPT Union
C
Swivel Nut Size
6” 3/4”, 1” 3/4”, 1” 10LT, 1A, 20LT
Centerline
A
MNPT Inlet
B
FNPT Union
C
Swivel Nut Size
6” 3/4”, 1” 3/4”, 1” 10LT, 1A, 20LT
(black iron shown)
(black iron shown)
COATINGS AVAILABLE
6569- Black Iron
6569G Zinc Coated w/Clear Chromate Finish Iron
6569B Paint Coated
6569H Zinc & Painted
Taps available on all the above product options.
WARNING
Over torquing may occur when the regulator is tightened on with the correct orientation and another turn is attempted to get the regulator positioned
all the way around, which can cause the casting to crack. Therefore, when attaching the regulator to the cast inlet connection, please use caution not
to over tighten. Use a wrench on the meter bar hexagon for assembly.
14.62”
4.75”
Gasket
Retaining
Ring
1.99”
1.30”
5.00” 6.00” 3.62”
C C
A
13.18”
4.75”
5” 6” 2.18”
A
C
Gasket
1.99”
Retaining
Ring