Brochure

77
800.292.2737 | [e-mail] | aymcdonald.com 800.292.2737 | [e-mail] | aymcdonald.com
Cast Iron Meter Bars
Cast Iron Meter Bars
4-19 4-19
REAR CENTER HORIZONTAL INLET & VERTICAL OUTLET - 2 PSIG
REAR CENTER HORIZONTAL INLET & VERTICAL OUTLET WITH LOCKWING - 2 PSIG
Cast Iron Meter Bars with Integral Valve - 6722 Series
Cast Iron Meter Bars with Integral Valve - 6722L Series
Multiple Meter Application
Multiple Meter Application
These bars are designed for use with natural, manufactured and L.P. gas only. For CMMC multiple meter manifold applications
These bars are designed for use with natural, manufactured and L.P. gas only. For CMMC multiple meter manifold applications
Centerline
A
FNPT Inlet
B
FNPT Union
C
Swivel Nut Size
6” 3/4” or 1” *3/4” or 1” 1A, 10LT, 20LT, 30LT, OEM
Centerline
A
FNPT Inlet
B
FNPT Union
C
Swivel Nut Size
6” 3/4” or 1” *3/4” or 1” 1A, 10LT, 20LT, 30LT, OEM
DIMENSIONS
FNPT x FNPT Union
(black iron shown)
High security lock design integral valve
With Relube Valve - This A.Y. McDonald Gas Valve may be re-
lubricated in the full open or full closed position when the valve is
pressurized or un-pressurized. See page 14.
NOTE: For side taps, add letters. See page 40 & 76. For other options, see page 76. All dimensions shown are for reference only. Contact factory if
specic dimensional values or tolerances are required.
COATINGS AVAILABLE
6722- Black Iron
6722G Zinc Coated w/Clear Chromate Finish Iron
6722P Paint Coated
6722H Zinc & Painted
Taps available on all the above product options.
6”
2.71”
3.5”
5.77”
3”
A
CC
B
Nitrile O-Ring
Relube Plug
*3/4” outlet obtained with reducing endpiece
DIMENSIONS
FNPT x UNION
(black iron shown)
COATINGS AVAILABLE
6722L- Black Iron
6722LG Zinc Coated w/Clear Chromate Finish Iron
6722LP Paint Coated
6722LH Zinc & Painted
Taps available on all the above product options.
2.71”
5.76”
3”
6”
C
C
B
Nitrile O-Ring
*3/4” outlet obtained with reducing endpiece