User's Manual

U-NII Config & User Guide 5.2 Axxcelera Broadband Wireless
5.2.12 leds
leds mode
mode
{active | debug} Defines the interpretation for the LEDs on
the wallbox.
Active = Upon boot the yellow light will go solid indicating
the unit has power. The green light is then a data traffic light and
flashes when data is transmitted on the terrestrial interface.
Debug = Upon boot the yellow light defines the terrestrial
interface, once for Ethernet, twice for ATM. The green light
becomes an RF link status light flashing once if the modems have
not synchronized and 5 times if they have.
Example
The follow example puts the unit’s wallbox into active mode.
leds active
5.2.13 max_mid
max_mid #
# {1-254} This is only set in the AP and sets the number of
interactive SUs that are allowed to register with the AP.
Example
The following example specifies 32 as the maximum MID supported by the AP and
effectively limits the number of SUs to 32.
max_mid 32
5.3 initswitchcli
5.3.1 tp
tp name service pcr
name
{name | default} Can be assigned a name or the default.
service
{UBR | CBR | ABR | VBR} UBR is currently the only service
that is supported.
March 10, 2003 Company Confidential Page 25 of 149