Specification Sheet

Starck Free-Standing Tub Filler
10406001
Available in Chrome
Product Specification
Mounts on floor beside tub
Requires rough-in 10452181 (purchased separately)
M2 Ceramic cartridge
Diverter for handshower
1/2” outlet for handshower
49 1/4” Starck handshower hose
tub spout
Not anti-scald - install with remote pressure balance valve 13418181 if required.
Backflow prevention furnished by check valve in the handspray outlet and automatically clos-
ing diverter
Maximum incoming water pressure 145 psi
Recommended water pressure 14.5 - 72 psi
Recommended max. incoming hot water temp. 120
o
F - 140
o
F*
Flow rate of tub filler @ 45 psi 5.75 gpm
Flow rate of handshower 2.5 gpm
*Know and follow all applicable plumbing codes when setting the temperature on the water heater.