Manual

6
ENGLISH
EN
5.2. Burner Ignition
SWITCH-ON
A) Press and turn the knob in an anti-
clockwise direction (position 1); at the
same time, press the button (B) to switch
on the pilot light. The ignition of the pilot
light can also be carried out manually
through the cover positioned on the
bottom (C).
B) Hold down the knob for about 10 seconds
in order to heat then release the knob.
C) Turn the knob in an anti-clockwise
direction to switch-on the burner (position
2).
D) Adjust burner power (position 3).
SWITCH-OFF
A) Turn the knob in a clockwise direction to
switch off the burner (position 1); the pilot
light stays on.
B) Turn the knob in a clockwise direction to
switch off the pilot light (position 0).
C) Wait five (5) minutes to clear out any gas
before relighting.
5.3. Filling the Cooking Tank
Turn the water loading knob to fill the tank up to
the desired level. Once the maximum level has
been reached, it is possible to switch on the
burner.
After having filled the tank, it is necessary to close
the valve to avoid dangerous overflowing.
If the water level drops blow the minimum value,
remember to open the valve.
! Do not use the appliance when the water
level is lower than the minimum level marked on
the tank.
5.4. Draining the Cooking Tank
The waste water must be evacuated through a
suitable manifold, which is resistant to a
temperature of at least 212°F (100°C). To drain
the water from the tank, turn the valve handle (A)
downwards.
C
Pos 1 Pos 2 Pos 3Pos 0
B
OPEN
Maximum
level
Minimum
level
CLOSE