User Manual

AXELL MBF -40 AMERICAS REPEATERS
PRODUCT DESCRIPTION AND USER’S MANUAL
8 Doc. No. 00071UM Rev. 3.2 © Axell Wireless Ltd
1.7.3 Internal Interfaces
This section shows the internal interfaces for various models. You will need to open the
Repeater in order to do the following:
• Connect power
• Connect optic Fibers
• Connect alarms (if relevant)
• Power-on (Power-ON switch)
• Optional – USB/Ethernet port for local setup
1.7.3.1 Single/Dual-Band Single Antenna Model
Figure 1-9: Single Band Repeater with Door Open
Alarms and relay connections (
section 3.8)
F/O Converter LEDs and optic
connector to which routed optic
fiber is connected (section 3.7)
Power connections
(section 3.9)
Controller module - USB local
setup connections. Refer to
section 7.4.1 for LED descriptions
Rechargeable backup
battery pack, see 3.9.6
Power and battery
switches. See section 3.9
Ethernet Local Setup port