User Manual

Setting the IP Address
894
4. Click the Network Interfaces menu and select either Ethernet 1 or Ethernet 2, depending on
which Ethernet port you want to use for your Artist Series controller.
5. Close the Euphonix dialog box.
6. Select the Apple menu > System Preferences.
7. In the Internet & Wireless area, click Network.
The Network dialog box opens.
8. Click the Action menu and select Set Service Order.
The Service Order dialog box opens.
9. If the Ethernet connection you want to use for your corporate network or shared storage
connection is not at the top of the network connections list, select that Ethernet connection
and drag it to the top of the list. For more information on setting the service order, see the
Apple Help for your Macintosh system.
10. Click Apply, and then close the Network dialog box.
Setting the IP Address
Avid Artist Series controllers typically use Dynamic Host Configuration Protocol (DHCP) to
obtain its IP address, usually from a router. The controllers revert to link-local addressing to
generate an IP address if a DHCP server is not found on the network — for example, when you