User Manual
Core Avid Audio Plug-Ins
939
AIR Vintage Filter Applies a modulating, resonant filter to the audio signal. For more information, see
“AIR Vintage Filter (RTAS)” on page 965.
BF Essential Clip
Remover
Repairs clipped audio recordings. For more information, see “BF Essential Clip
Remover (AudioSuite)” on page 966.
Bomb Factory BF76 Provides compression modeled after the 1176 studio compressor. For more
information, see “Bomb Factory BF76 (RTAS and AudioSuite)” on page 967.
Chorus Provides time-delay and pitch-shift effects, added to the clip to create a multi-layered
sound. For more information, see “Chorus (AudioSuite)” on page 967.
Compressor/Limiter III Applies either compression or limiting to audio material, depending on the ratio of
compression used. For more information, see “Compressor/Limiter III — Dynamics III
(RTAS and AudioSuite)” on page 968.
D-Verb
™
Provides a studio-quality reverberation or ambience processing to single or multiple
tracks. For more information, see “D-Verb (RTAS and AudioSuite)” on page 972.
DC Offset Removal Removes an audio artifact that is common in digital audio files. A DC offset is caused
by poorly calibrated analog-to-digital converters (A/Ds), and can produce clicks and
pops on clip edit transitions if not removed. For more information, see “DC Offset
Removal (AudioSuite)” on page 973.
De-Esser III Reduces sibilants and other high frequency noises that can occur in vocals, voiceovers,
and wind instruments such as flutes. For more information, see “DeEsser III —
Dynamics III (RTAS and AudioSuite)” on page 973.
Delay Provides time-delay-based effects. Effects obtained through the use of Delay include
slap echo, doubling, chorusing, and flanging. For more information, see “Delay Plug-In
(RTAS and AudioSuite)” on page 975.
Duplicate Creates a new master clip from a selected audio clip. The plug-in uses the In and Out
points on the selected clip to define the boundaries of the new clip. For more
information, see “Duplicate (AudioSuite)” on page 976.
EQ Lets you adjust frequency equalization on individual audio clips. Four EQ plug-ins are
available: 1-Band EQ II, 4_Band EQ II, 1-Band EQ III, and 7-Band EQ III. For more
information, see “EQ (AudioSuite)” on page 977.
Expander/Gate III Applies expansion or gating to audio material, depending on the ratio setting. For more
information, see “Expander/Gate III — Dynamics III (RTAS and AudioSuite)” on
page 982.
Flanger Creates a flange effect that approximates a true tape-generated flange. For more
information, see “Flanger (AudioSuite)” on page 984.
Audio Plug-ins
Plug-In Description