User Manual

Capture Settings
1363
Capture Settings: Batch Tab
Option Description
Optimize for disk space When this option is selected, your Avid editing application captures only the exact
amount of material in the master clips plus any additional handles. The tape pauses
and prerolls independently for each master clip that is batch captured.
Optimize for batch speed When this option is selected, your Avid editing application speeds up batch
capturing by allowing the deck to continue to roll forward between adjoining clips.
To qualify for this operation, the two adjoining clips must meet the following
criteria:
• There is 5 seconds or less between the OUT point of the first clip and the IN
point of the second clip.
• The two clips have the same video resolution and the same audio rate.
n
If you select this option, your Avid editing application might occasionally
capture more material than you need.
Switch to emptiest drive
if current drive is full
When this option is selected, your Avid editing application switches to the target
media storage drive with the most available space when the current target drive
becomes full during batch capturing. Your Avid editing application switches before
starting to capture the clip, based on the number of minutes in the clip. For more
information, see “Batch Capturing from Logged Clips” on page 239.
When this option is deselected, your Avid editing application stops capturing when
a drive becomes full.
Rewind tape when
finished
When this option is selected, your Avid editing application automatically rewinds
tapes after batch capturing finishes.
Eject tape when finished When this option is selected, the tape ejects as soon as the last shot from that tape is
captured. You can do other tasks while the tape is in use and be alerted as soon as
the tape is no longer needed.
Log errors to the console
and continue capturing
When this option is selected, your Avid editing application continues capturing if an
error occurs during the capture process.
Capture the tracks logged
for each clip
When this option is selected, your Avid editing application captures the tracks
logged for each clip.
Use the audio sample rate
logged for each clip
When this option is selected, your Avid editing application uses the audio sample
rate logged for each clip.
Use the audio bit depth
logged for each clip
When this option is selected, your Avid editing application uses the audio bit depth
logged for each clip.