User Manual

28
Enable the conditions in Login section you want the system to automatically carry out.
- Auto Login after system boot up
Execute the DVR when the operating system is started.
- Auto Record after system boot up
Automatically start video recording when the DVR is executed.
- Auto start Network after system boot up
Automatically start network connection when the DVR is executed.
- Default user
Automatically log in to the selected default user when the DVR is executed.
(10) Date and Time Setting
Adjust the DVR system time and date. Click Setting to select the month, date, hour, and minute.
Mark Daylight saving check box to enable daylight saving function. And then, select the Start and End
Date/Time by click Setting.
Daylight Bias: Assign a time that it is for daylight saving time offset in your time zone. For example: if the
time zone is in U.S. Eastern, the time offset is 1 hour.
(11) Firmware
 Product Version Update: Upgrading the firmware of DVR system.
1. Click Update button, a Firmware Upgrade window will show up.
2. Save the firmware on root directory of USB disk. And then, plug USB disk into DVR unit.
3. Select the USB disk if there is more than one USB disk from drop down list. The DVR unit will
auto detects the firmware.
4. Click OK to start upgrading.
 IPCam Module Firmware Update: Update firmware of IP camera.
1. Click Update button, a Firmware Upgrade window will show up.
2. Save the firmware on root directory of USB disk. And then, plug USB disk into DVR unit.
3. Select the USB disk if there is more than one USB disk from drop down list. The DVR unit will