User manual

ManualsBrandsAvenview Manualsaudio & home theatreStereo Receiver VGA-C5A-R

www.avenview.com

VGA & Audio Receiver SET over Single

CAT5 with RGB Delay Control

Model #: VGA-C5A-R

The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with

respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any

time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in

Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products

including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.

Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.

Summary of content (11 pages)

PAGE 1
VGA & Audio Receiver SET over Single CAT5 with RGB Delay Control Model #: VGA-C5A-R © 2010 Avenview Inc. All rights reserved. The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice.
PAGE 2
Table of Contents Section 1: Getting Started ...................................................................................................................... 3 1.1 Important Safeguards ............................................................................................................ 3 1.2 Safety Instructions ................................................................................................................. 3 1.3 Regulatory Notices Federal Communications Commission (FCC) ..
PAGE 3
Section 1: Getting Started 1.1 Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. What the warranty does not cover   Any product, on which the serial number has been defaced, modified or removed. Damage, deterioration or malfunction resulting from:  Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product.
PAGE 4
1.3 Regulatory Notices Federal Communications Commission (FCC) This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. 1.
PAGE 5
www.avenview.
PAGE 6
1.5 Package Contents Before you start the installation of the converter, please check the package contents. - VGA-C5A-R Power Adapter (+5VDC, 2A) x1 x2 - User’s Manual x1 1.6     Before Installation Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction. Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity. Use the DC power adapter with correct specifications.
PAGE 7
1.7 Panel Description FRONT PANEL (Receiver, VGA-C5A-R) 1. STEREO OUT 2. VGA OUT S/PDIF OUT REAR PANEL (Receiver, VGA-C5A-R) 1. 5V 2A DC Power Connector 2. RJ45 IN 3. EQ: Rotary Control for equalization of R, G, B respectively Rotary Control: R=0~2, G=3~5, B=6~7 for de-skew compensation on respective color channel Push button to increase level of de-skew compensation 4. GAIN: Rotary control for Gain Control of R, G, B respectively Push button to decrease level of de-skew compensation 5. 7.
PAGE 8
1.8 Installation To setup Avenview VGA-C5A-R follow these steps for connecting to a device: 1. 2. 3. 4. 5. 1. 2. Connect VGA display to VGA-C5A-R Connect CAT5/CAT6 cable between Transmitter (VGA-C5A-S or VGA-C5SP-4 or VGA-C5SP-8) and Receiver (VGA-C5A-R) Ensure that cables are tightly connected Plug in 5V DC power cord to the power jack of the Receiver VGA-C5A-R. Plug in 5V DC power cord to the power jack of the Transmitter VGA-C5A-S, or VGA-C5SP-4 or VGA-C5-SP-8.
PAGE 9
Section 2: Specifications Item Units Unit Description Video Bandwidth VGA-C5A-S (Sold Separately) VGA Transmitter with Audio Video Support Supported Resolutions Resolution and Distance Audio Support Equalization Input Video Signal Input Output VGA Connector RJ45 Connector Dimensions (L x W x H) Power Supply Power Consumption VGA-C5A-R VGA Receiver with RGB Delay Control 350MHz VESA Up to WUXGA (1920 x1200) WUXGA 1920x 1200 at 300 meters (1000 feet) Stereo Continuous Analog Control 1.
PAGE 10
Notice 1. All transmission distances are measured using Belden 1583A CAT-5e 125MHz LAN cable and STRODESIGN Video Signal Generator VG-859C. The transmission distance is defined as the distance between the video source and the VGA display. 2. The transmission length is largely affected by the type of LAN cables, the type of video sources, and the type of display.
PAGE 11
Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc.