Application Note

EMH; Reviewed:
SPOC 9/27/06
Solution & Interoperability Test Lab Application Notes
©2006 Avaya Inc. All Rights Reserved.
29 of 42
vpnphone_ssg.doc
option shown below. Press the * key to enter the VPN Options menu.
VPN Start Mode: Boot
*=Modify #=OK
b. During Telephone Operation:
While the VPNremote Phone is in an operational state, i.e. registered with Avaya
Communication Manager, press the following key sequence on the telephone to enter VPN
configuration mode:
Mute-V-P-N-M-O-D-# (Mute-8-7-6-6-6-3-#)
The follow is displayed:
VPN Start Mode: Boot
*=Modify #=OK
Press the * key and the VPN Options menu to enter the VPN Options menu.
2.
The following VPN configuration options are displayed. The settings highlighted below are from
the VPNremote Phone of user owen. For detailed description of each VPN configuration option,
see Section 11 VPNremote for the 4600 Series IP Telephones Release 2.0 Administrator Guide.
Server: 100.2.2.100 (Public Eth2 address of SSG A)
User Name:
owen
Password: xxxxx (Must match XAuth user password entered in Section 4.5.2)
Group Name:
[e-mail]
Group PSK: xxxxx (Must match PreShared Key entered in Section 4.7.1)
VPN Start Mode:
BOOT
Profile: Modify: Juniper Xauth with PSK (Press Profile softbutton to access)
Press the ► hard button to access next screen with the following VPN configuration options.
Password Type: Save in Flash (User not prompted at phone boot)
Encapsulation
4500-4500
Syslog Server:
IKE Parameters: DH2-ANY-ANY
IKE ID Type:
USER-FQDN
Diffie-Hellman
Group:
2
Encryption Alg:
Any
Authentication Alg:
Any
IKE Xchg Mode:
Aggressive
IKE Config Mode:
Enable
IPSec Parameters: DH2-ANY-ANY
Encryption Alg:
Any