Application Note

EMH; Reviewed:
SPOC 9/27/06
Solution & Interoperability Test Lab Application Notes
©2006 Avaya Inc. All Rights Reserved.
20 of 42
vpnphone_ssg.doc
4.7.1. AutoKey IKE Gateway Configuration - Phase 1
1.
From the left navigation menu, select VPNs > AutoKey Advanced > Gateway.
Select New. Configure the highlighted fields shown below. All remaining fields can
be left as default.
Provide a descriptive Gateway Name. Selecting Custom Security Level provides
access to a more complete list of proposals available on this Juniper SSG. Selecting
Dialup User Group associates the Group vpnphone-grp created in Section 4.6 to
this IKE gateway.
Enter an ASCII text string for a Preshared Key that will match the text entered on
the Avaya VPNremote Phone.
Outgoing Interface is the interface which terminates the VPN tunnel.
Select Advanced to access additional configuration options.
2.
Configure the highlighted fields shown on the next page. All remaining fields can be
left as default. Select Return to complete the advanced configuration, and then OK to
save.
Select Security Level of Custom and the appropriate Phase 1 Proposal from the drop
down menu. Refer to Table 3 – IKE P1 / P2 Proposals.