Application Note

EMH; Reviewed:
SPOC 9/27/06
Solution & Interoperability Test Lab Application Notes
©2006 Avaya Inc. All Rights Reserved.
12 of 42
vpnphone_ssg.doc
4.4. Routes
The sample configuration requires two new route entries be added to the Juniper SSG routing
table, one specifying the default route and one specifying the network address range entered for
the IP Address Pool in Section 4.3. Although several routing options exist in the Juniper SSG
platform, static routes are used for this sample configuration.
4.4.1. Configure Default Route
1.
From the left navigation menu, select Network > Routing > Destination
The Route Entries screen similar to the one below appears.
Select trust-vr from drop down menu then New