Administrator's Guide

Managing phones
555-233-506112 Issue 5 October 2002
3. In the Security Code field, enter a password for the IP phone user.
NOTE:
Although the system accepts a null password, the IP phone will not
work unless you assign a password.
4. Press
ENTER to save your work.
Changing from dual-connect to single-connect
IP phones
When you have a dual extension phone and you upgrade to a single extension
phone, you can remove the connection that is no longer used for that phone.
To remove the H.323 connection that is no longer needed, first record the media
complex extension number:
1. Type
change station nnnn, where nnnn is the extension number of the
original dual-connect phone that you are replacing with a single-connect
phone.
The Station screen appears.
2. Move to the Media Complex Extension field.
3. Write down the number in the Media Complex field, then delete the
number from the field.
4. Press
ENTER to save your changes.
Now remove the extension you recorded. Before you remove an H.323 extension
from your system, check the status, remove it from any group or usage lists, and
then delete it from the system’s memory.
For example, if you wrote down extension 1234 before you removed it from the
Media Complex field on the Station screen, then remove extension 1234 using
these steps:
1. Type status station 1234 and press
RETURN.
The General Status screen appears.
2. Make sure that the extension:
■ is idle (not making or receiving calls)
■ has no messages waiting
■ has no active buttons (such as Send All Calls or Call Forwarding)