Telephone User Manual

If you have a display, it shows the volume level: (There are eight

volume levels.)

To turn off the speaker and return to handset

1. Pick up the handset.

To end a call (while the handset is on-hook and only the speaker is

active)

1. Press .

To activate the speaker while using the handset so that both are active at

the same time (the Group Listen feature, if administered)

1. While you are using the handset, activate the speaker by pressing

Note: If you hang up the handset within 10 seconds after pressing ,

the call remains active on the speaker.

If you hang up the handset more than 10 seconds after pressing

, the speaker will also turn off, and the call is disconnected.

The two-way built-in speakerphone allows you to place and answer calls

without lifting your handset.

Note: Your telephone may be set for the two-way speakerphone or for the

one-way, listen-only speaker. Check with your system manager to see

which of these features you can use.

Note: Speakerphones may not operate satisfactorily in every environment

(such as in very noisy locations). In such an environment, the

one-way, listen only speaker should be used.

Note: Some locations may wish to use the speakerphone for the Group

Listen feature. With this feature you can hear the other person through

the handset and speakerphone, but in order to speak to the other

person, you must use the handset. Ask your system manager if the

Group Listen feature has been administered for your telephone.

To place or answer a call without lifting the handset, or to use the

speakerphone with any feature

1. Press .

2. Place or answer the call, or access the selected feature.

3. Adjust speakerphone volume if necessary:

To raise the volume, press the right half of the Volume control button

labeled

; to lower the volume, press the left half of the Volume

control button labeled .

Speakerphone

->>>>>> +

Spkr