Specifications

PARTNER
®
Advanced Communications System
13
Form C—Extension Settings: Feature Descriptions
Feature Descriptions—(Continued) 0
# F
EATURE DESCRIPTION
Ext. 10
Only
Button Light
Required
Button Light
Recommended
8 Caller ID Inspect When a user at a display phone is already on a call, this feature shows Caller ID information for
another line (if Caller ID information is available on that line) without disconnecting the current call
or putting it on hold. When the feature is active, the button light is on.
●
9 Caller ID Logging (ACS R2.0 or later only) Users at a display phone can access a Caller ID log to ascertain caller’s
phone numbers automatically. When a user has logged calls, the word CALLS displays. ●
10 Caller ID Name
Display
When a user at a display phone is on a call on a line that has Caller ID information available, this
feature lets the user switch between the caller’s phone number (the default display) and the caller’s
name (if available). When the feature is active- indicating that the caller’s name should be
displayed-the button light is on.
●
11 Do Not Disturb Prevents calls from ringing at the extension. When the feature is active, the button light is on.
Intercom calls get a busy signal, and outside callers hear ringing. Use only if someone else
answers the extension’s outside calls. If VMS Cover and Do Not Disturb are both active, intercom,
transferred, and outside calls on owned lines go directly to the extension’s voice mailbox. If Call
Coverage and Do Not Disturb are both active, intercom, transferred, and outside calls on lines
assigned ownership go directly to the covering extension. Transfer Return type calls will ring a
phone with Do Not Disturb active.
●
12 Privacy Lets system phone users press a programmed button to turn Privacy on and off, preventing or
allowing users to join calls at the user’s extension as needed. ●
13 Record-A-Call This feature applies only to systems that have PMVS (R5.0 or later) equipped with four ports, and
an MLS or PARTNER system phone. This feature is not available on tip/ring phones. ●
14 VMS Cover This feature only applies if you have a voice messaging system. It defines the number of times a
call rings before it is sent to a user’s voice mailbox. ●
15 Voice Interrupt on
Busy Talk-Back
This feature is available only on system phones. This feature lets you program a button that is used
to respond to a voice interrupt on busy call while the user is active on another call. ●
16 Intercom Auto
Dialing-Ring
Places a ringing intercom call to an extension, or transfers a call. If on a button with lights, the lights
show calling activity at the destination extension. ●
17 Intercom Auto
Dialing-Voice
Signal
Places a voice-signaled intercom call to the extension's phone speaker, or transfers a call with a
voice-signaled announcement. If on a button with lights, the lights show calling activity at the
destination extension.
●
18 Manual Signaling -
Ring
Beeps the designated extension. If the user presses
i first, pressing the button places a
ringing intercom call to the extension, or transfers a call. If on a button with lights, the lights show
calling activity at the destination extension.
●