Application Note

7. Click PoE Port Status to review the PoE status of all ports on the POE4408.
Alternatively, the following CLI commands can be used to explicitly enable PoE support on one
or all ports, configure the PoE priority of one or all ports, as well as allow users to attach a text
string to identify the location and type of PD connected to one or all PoE ports.
config inlinepower adminmode <slot.port/all> enable
config inlinepower priority <slot.port/all> <critical/high/low>
config inlinepower type <slot.port/all> <string>
Enter the command show inlinepower switch to view PoE settings for the switch.
(L2SW) >show inlinepower switch
Main PSE Power (W) ....................... 60
Operation Status ......................... On
Power In Use (W) ......................... 8
Usage Threshold (%) ...................... 80
Trap Mode ................................ Disable
Software Version ......................... 00.0400.00
SCR; Reviewed:
SPOC 2/21/2006
Solution & Interoperability Test Lab Application Notes
©2006 Avaya Inc. All Rights Reserved.
9 of 14
CybrPthPOE4408.doc