Application Note

SCR; Reviewed:
SPOC 8/24/2005
Solution & Interoperability Test Lab Application Notes
©2005 Avaya Inc. All Rights Reserved.
6 of 14
x450-avqos.doc
change ip-interface 01a04
IP INTERFACES
Type: MEDPRO ETHERNET OPTIONS
Slot: 01A04 Auto? y
Code/Suffix: TN2302
Node Name: MEDPRO-01a04
IP Address: 70 .1 .1 .4
Subnet Mask: 255.255.255.0
Gateway Address: 70 .1 .1 .254
Enable Ethernet Port? y
Network Region: 1
VLAN: n
Use the command change ip-network-region to configure QoS and other parameters for a
network region. It is recommended to enable IP direct for intra-region and inter-region
connections. RSVP is not used and is disabled by default. The Avaya components including C-
LAN, MEDPRO, IP Telephones, and Softphones will receive QoS values (802.1p priority 6 and
DiffServ 46) and other parameters from network region 1 in the test configuration. By
configuring IP Codec set 1 to Network Region 1, all intra-region calls in Network Region 1 will
use IP Codec set 1.
change ip-network-region 1 Page 1 of 19
IP NETWORK REGION
Region: 1
Location: Home Domain:
Name:
Intra-region IP-IP Direct Audio: yes
AUDIO PARAMETERS Inter-region IP-IP Direct Audio: yes
Codec Set: 1 IP Audio Hairpinning? y
UDP Port Min: 2048
UDP Port Max: 3028 RTCP Reporting Enabled? y
RTCP MONITOR SERVER PARAMETERS
DIFFSERV/TOS PARAMETERS Use Default Server Parameters? y
Call Control PHB Value: 46
Audio PHB Value: 46
802.1P/Q PARAMETERS
Call Control 802.1p Priority: 6
Audio 802.1p Priority: 6 AUDIO RESOURCE RESERVATION PARAMETERS
H.323 IP ENDPOINTS RSVP Enabled? n
H.323 Link Bounce Recovery? y
Idle Traffic Interval (sec): 20
Keep-Alive Interval (sec): 5
Keep-Alive Count: 5