Application Note

SCR; Reviewed:
SPOC 8/24/2005
Solution & Interoperability Test Lab Application Notes
©2005 Avaya Inc. All Rights Reserved.
5 of 14
x450-avqos.doc
Avaya
Equipment
802.1p/Q and DiffServ
Configuration
Summit X450-24T Port
Configuration
(IP telephones are mapped to an IP network
region based on source IP addresses)
IPSI on Avaya
G650 Media
Gateway
Using IPSI administration from IPSI
services port to set DiffServ value to 46.
Untagged VLAN
C-LAN and
MEDPRO on
Avaya G650
Media Gateway
DiffServ value is received from the IP
network region configured in Avaya
Communication Manager.
Untagged VLAN
Avaya S8500
Media Server
Use change ip-services interface to set
DiffServ value to 46.
Untagged VLAN
Table 2 – QoS and Port Configuration Summary
4. Configure Avaya Communication Manager
The configuration information provided in these Application Notes relates to steps necessary for
testing QoS. For information on how to set up an H.323 IP trunk between Avaya
Communication Manager and Avaya IP Office, please refer to the Solution and Interoperability
Application Notes entitled, “How to configure an H.323 IP trunk between an Avaya IP600
Internet Protocol Communication Server and Avaya IP Office Server – Issue 1.2.”
4.1. Configure the Avaya S8500 Media Server
In the test configuration, the C-LAN and MEDPRO are configured to network region 1. Use the
command change ip-interface to configure the C-LAN and the MEDPRO of the Avaya G650
Media Gateway. The following two screens display the configurations of the C-LAN (01A03)
and the MEDPRO (01A04). Note that the C-LAN and MEDPRO are assigned to Network
Region 1 without VLAN tagging.
change ip-interface 01a03
IP INTERFACES
Type: C-LAN ETHERNET OPTIONS
Slot: 01A03 Auto? y
Code/Suffix: TN799 D
Node Name: CLAN-01a03
IP Address: 70 .1 .1 .3
Subnet Mask: 255.255.255.0
Gateway Address: 70 .1 .1 .254
Enable Ethernet Port? y
Network Region: 1
VLAN: n
Number of CLAN Sockets Before Warning: 400