Application Note
KN; Reviewed:
SPOC 9/21/2006
Solution & Interoperability Test Lab Application Notes
©2006 Avaya Inc. All Rights Reserved.
44 of 52
NT-SG_AppNote
NT-SG ( 32ch) Module : SIP2
User Info (User Info - Table No. 0002)
Info :[Used]
Main :[ ]
Regist :[Off]
User Name :[05033804037 ]
Display Name :[ ]
Contact User Name :[ ]
Del Column :[0 ]
Add Number :[ ]
Authorization Challenge Data
1st User ID :[ ]
1st Password :[ ]
2nd User ID :[ ]
2nd Password :[ ]
Contact Parameter q :[ ]
Display Screen :[Next] Table No. :[ ]
--------------------------------------------------------------------------------
Selection: Tab, Down, Up, Right, Left, Character, Enter
Figure 44: User Info Form – Table 2
For the No.Plan of the SIP module 2, specify the numbering plan. All dialed numbers conveyed
from the Avaya SES to the Hitachi NT-SG begin with “9” as described in Step 8 of Section 3.
This configuration was needed to delete the “9” from the dialed numbers before the Hitachi NT-
SG treated the numbers.
• Select the SIP Module 2 item on the Set Configuration Module Select screen (Figure
25) and press the enter key. The Type form will appear as shown in Figure 35.
• Press the space key until the No.Plan1 type is displayed at the Configuration Type field.
• Press the enter key and then the Numbering Plan Menu screen will appear as shown in
Figure 45.
• Select the Table item by using the down and up arrow keys, and press the enter key. The
Numbering Plan-Table No.001 form will appear as shown in Figure 46.