Application Note

KN; Reviewed:
SPOC 9/21/2006
Solution & Interoperability Test Lab Application Notes
©2006 Avaya Inc. All Rights Reserved.
32 of 52
NT-SG_AppNote
NT-SG ( 32ch) Module : Main
Configuration (System Basic2)
Port1
IP Address :[192.168.135.209]
Subnet Mask :[255.255.255.0 ]
Default Gateway
Primary :[192.168.135.1 ]
Secondary :[ ]
SIP IP Header Type Of Service(Hex) :[00]
RTP/RTCP IP Header Type Of Service(Hex) :[00]
VIDEO RTP/RTCP IP Header Type Of Service(Hex) :[00]
LAN Speed :[ AUTO ]
--------------------------------------------------------------------------------
Selection: Tab, Down, Up, Right, Left, Character, Enter
Figure 29: System Basic2 Form – for Port 1
In the System Basic3 form (Figure 30), the network interface information for the Hitachi NT-
SG assigned from the SIP telephony service provider was configured.
• Specify the IP address assigned to the Hitachi NT-SG in the SIP Service Provider
network into the IP Address field.
• Specify the subnet mask of the SIP Service Provider network into the Subnet Mask field.
• Specify the default gateway address of the SIP Service Provider network into the
Primary field. In this example, the secondary default gateway was not used. If needed,
also the Secondary field would be specified.
• Press the enter key three times (the tab key twice) to return to the System Menu screen
(Figure 28). The enter key functions as moving the next screen, and the tab key functions
as going back the previous screen.
• Return to the Type form (Figure 26) using the tab key (press it twice).
• Press the enter key and enter “y” to save the changes to the Hitachi NT-SG.