Application Note
The main module is capable of storing two configurations. In these Application Notes, Conf-1
was used for storing the configuration.
• Press the space key until the Conf-1 type is displayed at the Configuration Type field.
• Press the enter key and then the Conf Menu screen will appear as shown in Figure 27.
KN; Reviewed:
SPOC 9/21/2006
Solution & Interoperability Test Lab Application Notes
©2006 Avaya Inc. All Rights Reserved.
30 of 52
NT-SG_AppNote
NT-SG ( 32ch) Module : Main
Configuration (Conf Menu)
----------------------------------
| 1 | System |
----------------------------------
| 2 | Channel |
----------------------------------
--------------------------------------------------------------------------------
Selection: Tab, Down, Up, Enter
Figure 27: Conf Menu Screen of Main Module
• Select the System item by using the down and up arrow keys, and press the enter key.
The System Menu screen will appear as shown in Figure 28.