User guide

Virtual Private Network
43
Figure 11: Equipment Setup and VPN window
6. Verify that the modem, IP Phone, and PC are connected properly.
7. Disconnect any VPN connection currently running on your PC. See
Figure 4, "IP Phone 1150E connections", on page 30 to confirm that
your LAN Ethernet Port and PC Ethernet Port on the IP Phone are
connected correctly.
Note: Connect the IP Phone LAN Ethernet port, marked with the %
symbol on the back of the phone to your network equipment only.
Connect only 1 PC (if applicable) to the PC Ethernet port, marked
with the ( symbol on the back of the phone.
Note: Optional: Click More to read a description of VPN.
8. Click Next.
The Locate Data Files window appears, as shown in Figure 12 on
page 44.