User's Guide

6-10 Installation and commissioning procedures
Internet BWA System 3200 NTXXXXXX Rel 3.0 Draft October 2000
Procedure 6-2 (continued)
Installing the Internet BWA System 3200 on a pole
Step Action
12 Use the pole clamps and hardware to attach the antenna mounting plate to
the pole as shown in Figure 6-4 on page 6-9 and Figure 6-2 on page 6-7.
13 Attach the galvanized flat washer, galvanized split lock washer and 3/8-16
galvanized hex nut to the end of the azimuth adjustment rod.
Install the antenna on the mounting assembly
14 Place the brass cylinder in one of the elevation adjustment holes (for the best
elevation angle) on the antenna mounting flange (see Figure 6-5).
Figure 6-5
Antenna installation (1 of 2)
MOP0094p.eps
—continued—
Elevation
adjustment holes
ODU mounting slots
(4 places)