Use and Care Manual

11
Leveling the Refrigerator
The refrigerator should be installed on a rm and level surface that will
be able to support the enre weight of a fully loaded unit. It is important
for the refrigerator to be leveled in order to work properly. It can be
raised or lowered by rotang the plasc sheaths around each of the feet
on the boom of the machine. If you nd that the surface is not level,
rotate the feet unl the refrigerator becomes level. You may need to
make several adjustments to level it. We recommend using a carpenter’s
level to check the machine. Turn the leveling feet to the right to lower
that side of the refrigerator. Turn the leveling feet to the le to raise that
side of the refrigerator.
Important: Once you are ready to install the unit in a cabinet or directly on the oor, you must
adjust the feet to level the refrigerator.
!
Installing the Door Handle
Cauon: Do not over-ghten the screws as this may cause damage to the handle or to the stainless
steel door.
!
To install the door handle:
1. Open the door and carefully pull the door gasket around the area where the handle is to be installed.
2. Insert each Phillips head screw through the gasket side of the door unl the screw passes through the door.
3. Align the handle with the screws and ghten using a Phillips head screwdriver unl the handle is ush
against the door frame.
4. Carefully press the door gasket into its original posion.