Specifications

TECHNICAL SPECIFICATIONS
INPUT VOLTAGE: 230V - 240V AC 50Hz
CONTROLLER VOLTAGE: 24V DC
STANDBY POWER: 1.8 Watts
MOTOR POWER: 100 Watts
MOTOR TYPE: 24V DC Permanent Magnet
OPERATING TEMPERATURE: +5° to +40°C
MAXIMUM DOOR OPENING:
1,2
WIDTH: 5500mm
HEIGHT: 2700mm
WEIGHT: 100Kg
MAXIMUM LIFTING FORCE: 200N (20Kg)
RECOMMENDED LIFTING FORCE: 120N (12Kg)
OPENER LIMITS TRAVEL: 3.0 Turns of Door Drum Wheel
OPERATING TIME - INTERMITTENT: 4 Minutes
RECEIVER TYPE: UHF 433.92 MHz. AM Receiver
RECEIVER CODE STORAGE CAPACITY: 24 x 4 Button Transmitter Codes
TRANSMITTER FREQUENCY: 433.92 MHz
CODING TYPE: Code Hopping
No. of CODE COMBINATIONS: Over 4.29 Billion Random Codes
CODE GENERATION: Non-linear Encryption Algorithm
PTX-4 TRANSMITTER BATTERY: A23 Alkaline 12 Volts
EAT-1 TRANSMITTER BATTERY: CR1220 Lithium 3 Volts
GLOBE: Festoon Type - 15W 24V DC
FUSE: 10A Slow Blow
DEFAULT SETTINGS AND SPECIFICATIONS
20
Note:
1. The maximum continuous curtain residential roll up door opening that the EasyRoller can be installed on is 5500mm wide by
2700mm high. The door must be well balanced. A person of average strength should be able to lift up the door manually with very
little effort in case of an emergency.
2. Intermittent operations may occur in areas which experience very strong winds. The strong wind puts extra pressure on the door
and tracks which may in turn trigger the safety obstruction detection system intermittently.
DEFAULT STEP MAXIMUM
MAXIMUM MOTOR RUN TIME 25 Secs. — —
COURTESY LIGHT TIME 3 Mins. 10 Secs. 4 Mins.
OBSTRUCTION FORCE MARGIN 8 1 20
AUTO CLOSE TIME 0 Secs. 1 Sec. 4 Mins.
FACTORY DEFAULT SETTINGS