Safety Information

The X-axis and Y-axis can be zoomed using your fingertips. The waveform can be

zoomed during or after capturing the signal.

Measurement Rulers

In the coordinate grid, there are two kinds of measurement rulers, which allow the

voltage and time duration of a waveform to be measured precisely. They are useful

when determining signal characteristics such as amplitude at specific points, the

cycle time (duration) and frequency.

The vertical Time Ruler - Tap the Ruler Activator in the bottom left corner of the

grid and drag it across the screen to the desired position. A Time Ruler is

generated.

The horizontal Y-axis Ruler - The Ruler can be generated in the similar way by

tapping the Ruler Activator in the upper right corner and dragging it downwards.

NOTE

The horizontal Y-axis ruler varies according to the settings of the voltage, current,

frequency, duty cycle, etc.

When Measurement Rulers are generated, a Ruler Table showing time and voltage

values for the corresponding channels will be displayed. The Delta icon refers to the

absolute difference between the values of the rulers, which can be locked by

tapping the Lock icon. Tap the X button in the upper right corner of the ruler table to

delete all rulers.

Figure 1-10 Sample Measurement Rulers Screen