Product Specs

 Lights yellow automatically at power up when VCI is self-testing
7. USB Port
IMPORTANT
Do not disconnect the programming device while the vehicle LED status light is on! If the
flash programming procedure is interrupted while the vehicle's ECU is blank or only partially
programmed, the module may be unrecoverable.
Programming Capability
The MaxiFlash VCI device is a D-PDU, SAE J2534 & RP1210 compliant PassThru
programming interface device. Using the updated OEM software, it is capable of replacing
the existing software/firmware in the Electronic Control Units (ECU), programming new
ECUs and fixing software-controlled drivability issues and emission issues.
Communication Capability
The MaxiFlash VCI device supports Bluetooth (BT), Wi-Fi, and USB communications. It
can transmit vehicle data to the tablet with or without a cable connection. In open areas,
the working range of the transmitter through BT communication is up to 328 feet (about
100 m). The working range of 5G Wi-Fi is up to 164 feet (50 m). If the signal is lost due to
being taken out of range, communication will be restored once the tablet is within range.
1.1.2 Power Sources
The VCI device can receive power from the following sources:
 Vehicle Power
 AC/DC Power Supply
Vehicle Power
The VCI device operates on 12/24 Volt vehicle power, which receives power via the
vehicle data connection port. The device powers on whenever it is connected to an OBD
II/EOBD compliant data link connector (DLC). For non OBD II/EOBD compliant vehicles,
the device can be powered from a cigarette lighter or other suitable power port on the test
vehicle using the auxiliary power cable.
AC/DC Power Supply
The VCI device can be powered from a wall socket using the AC/DC power adapter.
1.1.3 Technical Specifications
Table 2-3 MaxiFlash VCI Specifications
4