Instruction Manual
LIUDPP000_eng-00AUTEC
37
6.4.5 At the end of inallation
Make sure that during inallation the protection measures on the Radio
Remote Control and/or in the Machine have not been made ineffective by
improper inallation works.
Look up in the Technical Data Sheet and check that the frequency band set
in the Radio Remote Control is permitted in the country of use.
Correctly close the Receiving Unit in order to maintain the protection from
du, contaminants and water:
- Make sure that the gasket is intact and correctly seated.
- Check that the housing parts correctly t so that they overlap.
- Tighten the screws.
6.4.6 Teing
The Inaller mu check and fill in the Technical Data Sheet in all its parts, adding
the date in which the radio remote controlled Machine has been put into service,
their amp and signature.