Owner Manual

Product Name:
Resin Whiskey Barrels and Water Pump Outdoor Patio Fountain
SKU #:
Instruction Manual
Please save this manual for future reference.
Thank you for purchasing this. This product has been manufactured with the highest standards of safety and
quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged
parts. If any parts are missing or damaged, do not attempt to assemble or use the product.
CARTON CONTENTS:
Description
Quantity
Fountain
1
Pump
1
Faucet Spout w/ tube
1
Handle
1
Bolt
1
Nut
1
Bird
1
Co
mpatible Pumps for this fountain:
Pump Model No.
Tools required for assembly: No tools required for assembly.
Assem
bly Instructions:
1. Unpack the contents of the box and check to make sure that all items are accounted for and in good
condition.
2. Select a flat, level surface for the assembly and final location of your fountain.
3. Attach the handle to the water spout using the bolt provided. Insert the bolt through the holes at the top of
the spout, secure with the nut.
4. Guide the water tube at the base of the spout through the opening in the top of the fountain. Place the
fountain water spout on top of the fountain.
5. From the opening at the back of the fountain base, insert the water supply tube into the pump outlet. Insert
the LED connector into the pump connector, and twist to tighten. Place the pump upright in the basin and
draw the pump power cord out of the fountain back.
6. Add clean water to the fountain. The water level should be approximately 30mm lower than the edge of the
basin.