User's Manual

DISPLAY

There are two default options for the LCD screen: FREQUENCY˝ or CHAN˝. Additionally,

you have a choice of displaying either SQ˝(squelch) or LEVEL˝ settings. Activate the menu

screen and scroll to DISPLY˝. Press SET and FREQUENCY˝ will ash. Press the UP button

and CHANNEL˝ will ash. Press the UP button and SQ˝ (squelch) will ash. Press the UP

button and LEVEL˝ will ash.

Once you decide whether you want Frequency˝ or Channel˝ as the default, press SET to

save it. If you choose Frequency˝, the receiver frequency will be displayed as the default. If

you choose Channel˝, then Group/Channel˝ will be displayed as the default.

Hint: If Frequency˝ is selected as the default, then by pressing the SET button quickly, the

Group/Channel˝ info will be displayed for a few seconds. If Channel˝ is selected as the

default, then by pressing the SET button quickly, the Frequency˝ will be displayed for a

few seconds.

The option of showing either Level˝ or Squelch˝ is also available. Whatever settings

are chosen for those items will be displayed once selected and saved. Level˝ is the

factory default.

LOCK

You can lock the receiver to prevent someone from accidentally pressing SCAN, SYNC or

the POWER buttons. Once everything is set and working, this is recommended.

PILOT

This is an inaudible tone generated by the transmitter to the receiver as additional

insurance to keep the receiver from generating noise when there is no signal present.

The Pilot should be left ON and only be turned OFF temporarily if troubleshooting the

system for problems.

SCAN

The option to perform a scan for a clear channel. The Audix Performance Series Wireless

Scan feature performs a scan to nd clear and open frequencies as well as compatible

frequencies when using multiple systems.