Datasheet

Solid LGC
Copper
Identical +/-
Conductors
Gold-Plated, AQ Solder
Chassis Ground Wire
SUB-A
SUBWOOFER INTERCONNECT
Sub-A minimizes distortion by using identical solid Long-Grain Copper conductors for “+” and “-“. Solid
conductors eliminate distortion caused by strand interaction. The simpler grain structure and fewer impurities
within Long-Grain Copper provide significantly clearer sound than normal OFHC copper. Gold-plated
high-conductivity plugs are attached with specially formulated AQ Solder.
DIRECTIONS: Sometimes there is a hum problem unless the subwoofer and receiver (or processor) are
attached to each other through a separate wire. If your system has a hum problem, try attaching the little
spade-lug tails to the metal chassis of the subwoofer amp and to the chassis of the sending component.
Usually, this extra wire will not be needed.
24 AWG Solid Long-Grain Copper (LGC) Conductor (+)
PVC Insulation
24 AWG Solid LGC Conductor (-)
Foil/Mylar/Foil Shield
Black PVC
Ground Wire
Black with Black Striped PVC Jacket
Symmetrical Coax Design