Quick start Guide

If you are experiencing a problem or need more information
(including the full manual) please check out the iD4 support page:
audient.com/support
audient.com
Installation Support
Please register your iD4 online to keep up to date with new firmware
releases, as well as useful content for getting the most out of your unit:
audient.com/register-a-product
Mac OSX
iD4 is class compliant which
means no drivers are needed for
operation. Simply plug in the USB
cable and set iD4 as your sound
device in OSX system preferences
and your DAW software.
Windows
1. Open the installer and follow
the instructions
2. Once installed, reboot the PC
3. Launch the iD application
4. The iD icon will appear in the
system tray allowing you to
change sample rate, latency
settings, and check for firmware
updates.
iOS
A driver is not needed for iOS
operation, however a powered
USB hub must be used (as an iPad
or iPhone cannot power iD4) along
with a “Camera Adapter” cable.
For firmware updates, iD4 must
be plugged into a Mac or Windows
computer.