User Manual

15 16
Hardware Features
Headphone Output
iD22 features a high current headphone
amplifier which is fed by it’s own separate
DAC. This can be used for reference
monitoring, to provide artist headphone mix
or to drive a small set of loudspeakers from
an unbalanced Y-split cable.
The headphone amplifier can be fed from a
number of sources as set in the Routing
Matrix found in the System Panel of the
iD mixer application (see previous pages
or the section found on page 27 for more
info).
A front panel potentiometer provides
digitally calibrated and perfectly matched
stereo volume control over the headphone
output.
Digital Inputs / Outputs
To complete the i/o package, iD22
features an optical input and output
connection. These can be set to operate as
stereo optical S/PDIF or 8-channel ADAT
via the System Panel in the iD mixer
application. Both formats will operate at up
to 96kHz sample rate, with ADAT dropping
to 4-channels at rates above 48kHz.
Running in S/PDIF mode, the optical i/o
provides the option to integrate an
audient
MiCO
TM
for 4-channels of audient micpre, or
an external reverb for monitoring.
Running in ADAT mode, the optical i/o
provides a great way to expand to 10-inputs
via an
audient ASP008
TM
for recording.
The ADAT outputs could also be connected
to headphone distribution systems such as
a Hearback
TM
HUB or to an 8-channel DAC
for summing purposes. We designed iD22
to grow with your needs.
For more information about setting up
sample rates and system clocking please
refer to pages 25 and 31 onwards.
Hardware Features
Example Output Routings - iD Mixer
Using iD22 for Monitoring & Tracking:
• Outputs 1+2: Main Mix to C/R
• Output 3: Mono Cue Mix A
• Output 4: Mono Cue Mix B
• Outputs 5+6 Phones Cue Mix A
Using iD22 with ITB Headphone Mixes
(send DAW headphone mix to iD22 3+4):
• Outputs 1+2: Main Mix to C/R
• Outputs 3+4: DAW Mix (ITB Phones)
• Outputs 5+6 Main Mix (Engineer)
Using iD22 for Mixing & Alt. Monitoring:
• Outputs 1+2: Main Mix to C/R
• Outputs 3+4: Alt. Loudspeaker
• Outputs 5+6 Headphone Reference
Using iD22 with Hardware Process Path
(bypassing iD mixer & monitor controller,
using with existing analogue monitor
control):
• Outputs 1+2: DAW Mix (Direct)
• Outputs 3+4: DAW Mix (To Outboard)
• Outputs 5+6 Headphone Reference
• Outboard sent back to Insert Returns