User Manual

ManualsBrandsAttic Breeze ManualsLighting & ElectricalGEN 3 AB-3523A-GRY Self-Flashing Attached Solar Attic Fan 35W Gray

Installation Guide

AB–2022

AB–3022

AB–4022

AB–6022

ATTENTION: PLEASE READ THROUGH THIS ENTIRE INSTRUCTION GUIDE

BEFORE PROCEEDING WITH YOUR INSTALLATION. MAKE SURE YOU HAVE

THE REQUIRED TOOLS AND MATERIALS TO COMPLETE THE INSTALLATION OF

YOUR SOLAR ATTIC FAN BEFORE BEGINNING.

America's Leader in Solar Powered Ventilation

GEN II SFA/SFD Model Series Fans

Summary of content (4 pages)

PAGE 1
America's Leader in Solar Powered Ventilation Installation Guide AB–2022 AB–3022 AB–4022 AB–6022 GEN II SFA/SFD Model Series Fans ATTENTION: PLEASE READ THROUGH THIS ENTIRE INSTRUCTION GUIDE BEFORE PROCEEDING WITH YOUR INSTALLATION. MAKE SURE YOU HAVE THE REQUIRED TOOLS AND MATERIALS TO COMPLETE THE INSTALLATION OF YOUR SOLAR ATTIC FAN BEFORE BEGINNING.
PAGE 2
Getting Started Your Attic Breeze solar attic fan is designed for easy installation with composite shingle roofs or other low-profile roofing materials which may accommodate self-flashing roofing products. For installation of our products on metal or tile roofs, please contact Attic Breeze for information about our curb-mount fans and roof curb adapter kits designed for these roof types. Your local building code may require specific fasteners or anchoring systems not discussed in this installation guide.
PAGE 3
Installing the Fan Step 1 - Cut the Hole After choosing the location where your solar attic fan will be installed, find the closest rafter to that location and determine if your roof has either 16" on center or 24" on center rafter spacing. If your roof has 24" on center rafter spacing, find the center point between two rafters and mark it as the center of the vent hole. For roofs with 16" on center spacing, mark the rafter itself as the center of the vent hole.
PAGE 4
Step 4 - Mount the Fan Remove all packaging material and tape from your fan. Position the fan so that it is centered with the vent hole and allow the control cable (and remote power cable connector if present) to hang freely from the bottom of the fan unit. Locate the control switch envelope included with your solar fan, or if installing a Breeze Mate® control system, please follow the instructions included with that product at this time.