Operation Manual

18
Telephone settings
Menu setup
Set date and time
Follow the steps below to set the date and time.
Press MENU and the screen shows SET TIME/
DATE.
Use the dialing keys (0 through 9) to set the
blinking digits. To enter a number that is less
than 10, you must enter a zero (0) before the
number. Use DIR/ or CID/ to move to the
next or previous digit and # (pound key) to
choose between AM and PM.
After entering all the digits in SET TIME/DATE,
the screen automatically prompts SET YEAR.
Use the dialing keys (0 through 9) to set the
blinking digits.
Press SELECT or MENU to save the new setting
and move to the next option.
NOTES:
If the date and time are not set and the telephone
is powered on, SET CLOCK flashes on the screen.
The month, date and time will be set
automatically with each incoming call if you
subscribe to caller ID service provided by your
telephone service provider (see About caller ID
on page 34).
Setting the date and time in this menu also sets
the time for the answering system. Before playing
each message, the answering system announces
the day and time the message was received (see
Information about messages on page 47). Before
using the answering system, use this menu to set
the year so that the system can determine the
correct day of the week. If you do not subscribe
to caller ID service provided by your telephone
service provider, you also have to set the date and
time, so that messages are dated correctly.
1.
2.
3.
4.
•
•
•
12:00
AM
11-20
15
SET YEAR
2010
12:00
AM
01-01
15
SET TIME/DATE
2010