User Manual

User manual Version 1.0

ABLELink

Serial-Ethernet Server

SW5001

33 / 50

LINK1 Setup

1. Click on the “COM1” link and the following screen appears, you can configure SW5001 as

transparent mode by default. Configure SW5001 as TCP server and the local port is 4660, IP filter is

disabled by default, if IP filter is enabled, only source IP 10.0.29.11 can connect to SW5001.

Configure SW5001 as TCP client, the destination IP is 10.0.29.11, destination port is 4660.

Pair Connection

In the case of the serial connection is established with two or more SW5001 to send data over Ethernet

network, i.e. pair connection mode, you can choose “pair connection” which is indicated in the following

figure to cope with any type of serial device.