User Manual
Table Of Contents
User manual Version 1.0
ABLELink
Wireless Serial Server
SW2001
Copyright © 2006 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
11 / 51
3.4 TCP/IP Port Number
Port number 4660 is default of SW2001 and is associated with serial port COM1. After your application
program connects to the TCP port 4660 of SW2001, data being sent to this TCP connection from your
application program are transparent to the COM1 of SW2001. Vice versa is also true.
4. Software Configuration
4.1 Configuration set by monitor.exe utility
Use monitor.exe that comes with the product CD or diskette to configure the network parameters of
SW2001. As you can see from the following picture, you can change IP address, gateway IP address,
subnet mask, user ID and password of SW2001 from the utility. For more details of the utility please refer
to Appendix-D Configuration Utility.
4.2 Configuration set by Telnet utility
You can use Telnet utility to change configuration settings of SW2001. To do so, please do the following.
Log in to the system
§ Telnet to SW2001 using command “Telnet IP_address”.
For example Telnet 10.0.50.100
1. After Telnet to SW2001, system prompts for a password, the default password is null.