User`s manual

INSTALLATION

AT-HD50SS

Extends HDMI signals to next cascading device with one local display

1. Switch off all devices, including monitors.

2. Connect a local HDMI display to the HDMI out of the AT-HD50SS and then connect a speaker

to the 3.5mm audio socket.

3. Connect to a HDMI source (such as a Blu-ray Disc player)

4. Connect AT-HD50SS to AT-HD50RSL (for cascading), to AT-HDRS (to HDTV at long range),

or AT-HD15SRS (to HDTV at mid range) via HDMI Signal Out RJ-45 port by a Cat-5e/6 cable.

5. Plug in the 5V 4A DC power supply.

6. Power on the HDTV.

7. Power on the HDMI source.

AT-HD50RSL

Relays HDMI signals to next cascading device with one local display

1. Switch off all devices, including monitors.

2. Connect a local HDMI display to the HDMI Out of the AT-HD50RSL and then connect a

speaker to the 3.5mm audio socket.

3. Connect to AT-HD50RSL via RJ-45 in by a CAT5 cable.

4. Connect to next AT-HD50RSL (for cascading), to AT-HD40RS (to HDTV at long range), or AT-

HD15SRS (to HDTV at mid range) via RJ-45 out by a CAT5 cable.

5. Plug in 5V 4A DC power supply.

6. Power on the HDTV.