Safety Information

ICB-A21-07-06 Safety Information
© Atlas Copco Industrial Technique AB - 9834 5683 01
3
Technical Data
Product Data
Motor voltage 35 V d.c.
Motor power 500 W
Speed 1200 r/min
Torque range 1.4 - 7 Nm (1.0 - 5.2 ft lb)
Weight 1.13 kg (2.48 lb)
Battery Compatibility
Accessory Article nr.
Battery, 14V (2.5Ah) 4211 6130 02
Battery, 18V (2.5Ah) 4211 6030 85
Battery, 36V (2.5Ah) 4211 6030 86
Ambient Temperature
Operating temperature, charge +5 to +40 °C
(+41 to +104 °F)
Operating temperature, discharge 0 to +40 °C
(+32 to +104 °F)
Storage temperature −20 to +40 °C
(−4 to +104 °F)
Charger Compatibility
Accessory Article nr.
Flex charger 4211 6083 84
Charger Temperatures
Charger operating tempera-
ture
+5 to +40 °C
(+41 to +104 °F)
Wireless LAN Information
Regulatory Do-
main
Band TxChannels
ETSI 2.4 GHz 1, 2, 3, 4, 5, 6, 7, 8,
9, 10, 11
U-NII-1 36, 40, 44, 48
U-NII-2 52, 56, 60, 64
U-NII-2e 100, 104, 108, 112,
116, 120, 124, 128,
132, 136, 140
FCC/IC 2.4 GHz 1, 2, 3, 4, 5, 6, 7, 8,
9, 10, 11
U-NII-1 36, 40, 44, 48
U-NII-2 52, 56, 60, 64
U-NII-2e 100, 104, 108, 112,
116, 132, 136, 140
U-NII-3 149, 153, 157, 161,
165
Declarations
Liability
Many events in the operating environment may affect the
tightening process and shall require a validation of results. In
compliance with applicable standards and/or regulations, we
hereby require you to check the installed torque and rota-
tional direction after any event that can influence the tighten-
ing result. Examples of such events include but are not lim-
ited to:
• initial installation of the tooling system
• change of part batch, bolt, screw batch, tool, software,
configuration or environment
• change of air- or electrical connections
• change in line ergonomics, process, quality procedures
or practices
• changing of operator
• any other change that influences the result of the tighten-
ing process
The check should:
• Ensure that the joint conditions have not changed due to
events of influence.
• Be done after initial installation, maintenance or repair
of the equipment.
• Occur at least once per shift or at another suitable fre-
quency.
EU DECLARATION OF CONFORMITY
We, Atlas Copco Industrial Technique AB, S-105 23
STOCKHOLM SWEDEN, declare under our sole responsi-
bility that the product (with name, type and serial number,
see front page) is in conformity with the following Direc-
tive(s):
2006/42/EC 2011/65/EU 2014/30/EU 2014/53/EU
Harmonized standards applied:
EN 301 893 V2.1.1 EN 300 328 V2.2.2 EN 301 489-1
V2.1.1 EN 301 489-17 V3.1.1, EN 55014-1:2017 EN
55014-2:2015 EN 62841-1:2015 EN 62841-2-2:2015, EN
61000-6-2:2005 EN 61000-6-3:2007+A1 EN
61000-6-4:2007+A1
Authorities can request relevant technical information from:
Product Compliance Manager, Atlas Copco Industrial Tech-
nique AB, S-105 23 Stockholm Sweden
Stockholm, 1 July 2020
Carl von Schantz, Managing Director
Signature of issuer