User's Manual

28
4 - Operations
pass
énone
é Off
é Off
é Off
A3L.b
t.LbA
t.Fil
In.sh
rt.Hi
rt.lo
é 1
Addr
é Off
d.Err
é Off
st.Op
é 1
st.tM
sa.Op
é 0
éL. réange
éH. réange
Password entry [3]
only if
Code value
<5000 (see pages 35…37)
AL3 latching and
blocking functions
none / Ltch
bloc
/ Lt.bL
LBA delay
(see page 31)
0ff= sensor break
1…9999 sec LBA
Filter time constant
Off/1...30 sec
Input shift
Off/
-60…60 digit
Error dead band
(PID algorithm only)
0ff/0.1…10.0 digits
Soft-start output value
(PID algorithm and
t.Mod =0ff)
0ff/0.1…100.0%
Soft-start
activation time
(only if
st.Op different than
0ff) 1…9999 sec.
Output safety value
0.0…100.0%
(-100.0…100.0% for
heat/cool)
Communication address
(if option installed)
0ff/ 1…247
Retransmission
low range
full scale [4]
Retransmission
high range
full scale [4]
Direct access
to the configuration
(pages 35 … 37)
Back to the 2nd parameter group
[3] If password is 0000 to 4999, parameter setting will be available to the opera-
tor without entering this password number. If password is 5000 to 9999, para-
meter setting will only be available by entering this password number.
[4] If option installed and configured for retransmission.