User manual

eco PDU PE Series User Manual

IP Address Determination

If you are an administrator logging in for the first time, you need to access the

eco PDU in order to give it an IP address that users can connect to. There are

two methods to choose from. In each case, your client computer must be on the

same network segment as the eco PDU. After you have connected and logged

in you can give the device its fixed network address. (See Device Management,

page 49.)

Method 1:

For computers running Windows, an IP address can be determined and/or

assigned with the IP Installer utility. The utility can be obtained from the

Download area of our web site or from the software CD. Look under Driver/

SW, and the model of your device. After downloading the utility to your

computer, do the following:

1. Unzip the contents of IPInstaller.zip to a directory on your hard drive.

2. Go to the directory that you unzipped the IPInstaller program to and run

IPInstaller.exe. A dialog box similar to the one below appears:

(Continues on next page.)