User manual

eco PDU PE Series User Manual

Features

Power Distribution

 Space saving 0U rack mount design with rear mounting

 IEC or NEMA outlet models

 2 digit 7-segment front panel LED shows Station / Bank / Outlet ID

 3 digit 7-segment front panel LED shows Current / Voltage / Power

Dissipation and readings from up to 4 environment sensors

 Safe shutdown support

 Daisy chain up to 5 additional stations

 Separate power for the unit's own power and its power outlets – the user

interface is still accessible even when an overload condition trips the

devices' circuit breaker

 Dedicated 8-outlet bank for critical load devices (PE9 models only) –

always powered on

 Proactive overload protection (POP) (PE8 and PE9 models only) –

automatically powers off the last outlet that caused the current overload

(see Proactive Overload Protection (POP) (PE9 series), page 6)

Remote Access

 Remote power control via TCP/IP and a built in 10/100 Ethernet port

 Network Protocols: TCP/IP, UDP, HTTP, HTTPS, SSL, SMTP, DHCP,

NTP, DNS, auto sense, Ping

 Out of Band operation via modem access

 Remote users can monitor outlet status via web pages on their browsers

 eco PDU Power Management software – eco Sensors

 Supports SNMP Manager V1, V2 & V3

Operation

 Remote power outlet control (On, Off, Power Cycle) by individual outlets

(PE8 / PE9 models)

 Outlet group support – the same action can be performed on specified

groups of outlets at the same time

 Supports multiple power control methods – Wake on LAN, System after

AC Back, Kill the Power