User manual

CE610 User Manual
11
Setting Up
Setting up the CE610 DVI KVM Extender system is simply a matter of
plugging in the cables. Make sure that all the equipment to be connected up is
powered off. Refer to the installation diagram on the following page and do the
following:
1. Connect the USB cable supplied with the package to the USB Type B on
the Local Unit (CE610L). Plug the other end of the cable into a USB Type
A port on the local computer.
2. Connect the DVI-D cable supplied with the package to the DVI-D input
port located on the Local Unit (CE610L). Plug the other end of the cable
into the DVI port on the local computer.
3. Plug either end of the Cat 5e cable into the CE610's Unit to Unit RJ45
port. Plug the other end of the Cat 5e cable into the Unit to Unit RJ45 port
of the Remote Unit (CE610R).
4. Plug one of the power adapters (supplied with this package) into an AC
source; plug the adapter's power cable into the CE610's Power Jack.
5. Use a DVI cable to connect the DVI-D output port on the Remote Unit
(CE610R) to your monitor.
6. Plug the cables from the remote USB devices (mouse, keyboard, etc.), into
their USB ports on the Remote Unit CE610R.
7. Plug the second power adapter (supplied with this package) into an AC
source; plug the adapter's power cable into the CE610R's Power Jack.