Operation Manual

B U I L D I N G I N D I M E N S I O N S
10
For this it is necessary:
1. To have an air inlet in the plinth
measuring 100 cm
2
venting up
behind the kitchen unit to the
appliance (see diagram).
2. To cut a ventilation opening of
25 cm
2
in the front of the
cabinet. If required, cover the
sawn edge with a finishing strip
or moisture-proof glue.
Ensure that the connection cables
hang freely.
When a drawer is installed beneath
the hob, make quite sure that the
distance between the upper side of
the drawer and the hob is at least
2.5 cm.
In combination with an oven.
Insulate oven from hob.
Note the nonstandard top size!
Drawer under hob.
Possibilities for a hob/ovencombination.
AT T E N T I O N
The electronics in the hob need to
remain cool when in use and this is
achieved by the aid of vents on the
underside of the appliance. Air is
supplied through these vents.