User's Manual

3. Utilities
ASUS SpaceLink 802.11g Access Point 37
Chapter 3 - Home Gateway Utilities
Firmware Restoration
This utility will automatically search out failed SpaceLink 802.11g APs
and upload a firmware that you specify. The process takes about 3 to 4
minutes and during this process the PWR, AIR, and WLAN LEDs will
remain lit while the LAN LED will flash slowly.
The Firmware Restoration utility is an emergency rescue tool to restore a
SpaceLink 802.11g AP which has failed during a previous firmware upload.
A failed firmware upgrade will cause the SpaceLink 802.11g AP to enter a
failure mode, waiting for the user to use the Firmware Restoration utility to
find and upload a new firmware. This is not a firmware upgrade utility and
cannot be used on a working SpaceLink 802.11g AP. Normal firmware
upgrades must be done through the web manager.
Using a Hub
If you have problems upload a firmware while using a network hub, try
connecting your computer directly to the LAN port. Either 10Base-T or
100Base-TX connections will work.