User's Manual

3. Utilities
ASUS SpaceLink 802.11g Access Point 23
Chapter 3 - Home Gateway Utilities
If you cannot find any the
SpaceLink 802.11g APs due to
a problem in the IP settings,
push and hold the “Restore”
button on the SpaceLink
802.11g AP over five seconds to
restore factory default settings.
Home Gateway Discovery (Cont.)
Web access through the WLAN port (over the Internet) is disabled by default
so that the above private IP can be used for configuration access. If Internet
access through the WLAN port is enabled by the user, port 8080 must be
used for configuration access. In this case, you would enter the following:
http://(WAN Port IP Address):8080 in your web browser.
If your computer’s IP is not on the
same subnet as the SpaceLink Dual-
Band Home Gateway, you will be
asked to change it. The IP address can
be any number from 2 to 254 that is
not used by another device.
Restart your Windows if you are
asked to.
Restore