User's Manual

DSL-N12U Chapter 2: Setting up the hardware

Note:

• The PPPoE Internet connection type is used in this setup case. The setup screen varies with

different Internet connection types.

• Obtain the required information such as the user name and password from your Internet

Service Provider (ISP).

3. Launch your web browser. The QIS web page appears automatically and starts

detecting your connection type, VPI/VCI value and encapsulation mode.

Note: If the QIS web page does not appear after you launched your web browser, disable the

proxy settings on your web browser.

4. Key in the user name and password. Click Apply.

If the QIS cannot detect your Internet connection type, click Manual Setting

and set up the Internet connection manually.