User Manual

1-14
Chapter 1: Product Introduction
Chapter 1
1.1.8 Internal connectors
1. Intel
®
Serial ATA 6 Gb/s connectors (7-pin SATA6G_12; SATA 6G_34;
SATA 6G_56)
TheseconnectorsconnecttoSerialATA6Gb/sharddiskdrivesviaSerialATA6Gb/s
signalcables.
IfyouinstalledSerialATAharddiskdrives,youcancreateaRAID0,1,5,and10
congurationwiththeIntel
®
RapidStorageTechnologythroughtheonboardIntel
®

Z390chipset.
• WhenusingaPCIeorSATAdeviceintheM2X4_1socket,SATA_56willbedisabled.
• WhenusingaSATAdeviceintheM2X4_2socket,SATA6G_12connectorwillbe
disabled.
• WhenusingtheSATA_56connector,nodevicemustbeconnectedtotheM2X4_1
connector.
• Theseconnectorsaresetto[AHCI Mode]bydefault.IfyouintendtocreateaSerial
ATARAIDsetusingtheseconnectors,settheSATAModeitemintheBIOSto[Intel
RST Premium (RAID)].